Hi everyone I'm in a bit of a conundrum, I've been trying to get this HMI on our machine and I am unable to retrieve it.
Device
Delta
Model: DOP-107EG
Methods I tried:
1. Connecting to laptop to upload all data through DOPSoft software (latest version)
-This gives an error message of "HMI terminates data transfer because screen data is prevented from uploading/downloading."
2. Trying to copy HMI on a flash drive on the system settings.
-Error message is "Operation is not allowed."
3. Using Ethernet cable on DOPSoft and FTP
-No connection could be made because the target machine actively refused it.Connection Failed.
I've been stuck all day trying to get it and any help would be helpful.
Let me know if there are other details that you need.
Edit:
-Also updated firmware and still cannot copy HMI
-Already tried CDC and DISK mode on USB Comm Mode settings
-I have not tried using an RS232 connection since there are none available at the moment.
Device
Delta
Model: DOP-107EG
Methods I tried:
1. Connecting to laptop to upload all data through DOPSoft software (latest version)
-This gives an error message of "HMI terminates data transfer because screen data is prevented from uploading/downloading."
2. Trying to copy HMI on a flash drive on the system settings.
-Error message is "Operation is not allowed."
3. Using Ethernet cable on DOPSoft and FTP
-No connection could be made because the target machine actively refused it.Connection Failed.
I've been stuck all day trying to get it and any help would be helpful.
Let me know if there are other details that you need.
Edit:
-Also updated firmware and still cannot copy HMI
-Already tried CDC and DISK mode on USB Comm Mode settings
-I have not tried using an RS232 connection since there are none available at the moment.