Hi all.
I have SLC 5/05 PLC which is kept for years as it is without using. I have been asked use the same plc for testing by downloading the program.
I have seen a solid fault red color on the processor which is showing after switching on the plc. Now, I think it might have lost the program and ip address as it was kept for a long time. Might be battery would have drained.
So, I couldn't bring it online via Ethernet.
Now, atleast it should show up in rslinx using rs232 driver. It doesn't not.
JFI Usin RSLINX CLassic lite 3.51.01 CPR 9 SR 5.1
I went and deletd the rs232 driver and configured a new rs232 and tried. no use.
I'm connectin 1747 CP3 cable to the plc channel 0 and usb converted to my pc.
I never saw any device coming up in rslinx,
Your help is really appreciated
I have SLC 5/05 PLC which is kept for years as it is without using. I have been asked use the same plc for testing by downloading the program.
I have seen a solid fault red color on the processor which is showing after switching on the plc. Now, I think it might have lost the program and ip address as it was kept for a long time. Might be battery would have drained.
So, I couldn't bring it online via Ethernet.
Now, atleast it should show up in rslinx using rs232 driver. It doesn't not.
JFI Usin RSLINX CLassic lite 3.51.01 CPR 9 SR 5.1
I went and deletd the rs232 driver and configured a new rs232 and tried. no use.
I'm connectin 1747 CP3 cable to the plc channel 0 and usb converted to my pc.
I never saw any device coming up in rslinx,
Your help is really appreciated
Last edited: