Hey everyone,
I am working with a LM 90/30 PLC, and I have programmed that already. However, I have a Quick Panel Control (6" TFT) that is hooked up to the PLC to display happenings in the PLC. I have used ethernet to connect between the PC and QP, and serial for QP to PLC connections. I am programming the QP using Proficy Machine Edition. I have set the QP as my target.
Now, my question is that I have 200 register values, and they are constantly changing because of a one-shot trigger used to collect 200 samples of an analog input. The analog input is from a function generator. I want to create a line graph that shows values from register 201 to register 400, since I am storing the 200 analog input samples in these registers. Is there a way to do this in Proficy? I called Tech Support and they told me that I would have to program each variable one at a time and create my own graph using lines, and it seemed overly tedious for such a simple task. I look forward to any suggestions.
I am working with a LM 90/30 PLC, and I have programmed that already. However, I have a Quick Panel Control (6" TFT) that is hooked up to the PLC to display happenings in the PLC. I have used ethernet to connect between the PC and QP, and serial for QP to PLC connections. I am programming the QP using Proficy Machine Edition. I have set the QP as my target.
Now, my question is that I have 200 register values, and they are constantly changing because of a one-shot trigger used to collect 200 samples of an analog input. The analog input is from a function generator. I want to create a line graph that shows values from register 201 to register 400, since I am storing the 200 analog input samples in these registers. Is there a way to do this in Proficy? I called Tech Support and they told me that I would have to program each variable one at a time and create my own graph using lines, and it seemed overly tedious for such a simple task. I look forward to any suggestions.