Profibus: ET200M hooked up with Experion PKS

[Wooter]

Hello,

I have coupled a Siemens ET200M remote IO module (6ES7 153-2BA00-0XB0) with an Honeywell Experion PKS system (Release 211) through a profibus SST-PFB-CLX-RLL card. I uploaded the correct GSD file in the SST card. All DI, DO, AI signals work fine.
The only problem remaining is that I don't get 4-20mA out of the AO card (332-5HD01-0AB0). I only get 0-10 V out of it, even if I configure it for 1-5V, 4-20mA, 0-10V (both in the SST card and in the Honeywell DCS).

[font=Arial,Bold]any ideas about how to fix this problem.[/font]
[font=Arial,Bold][/font]
[font=Arial,Bold]best regards
[/font]

 

[10BaseT.]

6ES7 332-5HD01-0AB0
Analog output module AO4/12 bits, reconfigurable online
Is what I get on the card - do you have a 300 series processor with a profibus port available for a test ?
How do you download the config to the bus module as it stands ?

 

[Wooter]

I use the SST PROFIBUS Configuration Tool for uploading the configuration in the card