ismail efe
Member
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate moxa, how should I follow?
omron cj2m with scada comunication
- Thread starter ismail efe
- Start date
IO_Rack
Member
What SCADA system are you using?
More specifically, what protocol is the SCADA using to communicate with current PLC?
The CJ2M is capable of FINS and Ethernet/IP protocols via ethernet connection.
More specifically, what protocol is the SCADA using to communicate with current PLC?
The CJ2M is capable of FINS and Ethernet/IP protocols via ethernet connection.
Similar Topics
Hi All,
I aim to use Aveva Plant SCADA 2020 to read and write data from/to Omron CJ2M CPU35 PLC using OMFINS protocol. However I have Bad Data...
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Hi all,
i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info.
my unit has an ip address of...
I have PLC Omron CJ2M with OD211 module. I want to use the pulse output and PWM output and this module. But i confuse how to activated this, i...
I have a project to control the speed of motor DC using PWM Output on PLC and when im on working i have a several trouble and of of them is the...
