AbjectControl
Member
Greetings!
Facing a problem I've not seen before.
GE CPE100 unit, LAN2 set up as ProfiNet. Multiple Turck TBEN-L4-16DIP modules, and a Numatics Valve Stack. ProfiNET DCP tool shows all devices are communicating correctly, with no errors or diagnostic messages. Valves are all fully controlled via the PLC, with no issue. All inputs to the Turck blocks show change state on the block itself, as well as on the individual block's webpage when on the network; however, no state changes to any of the Inputs in the actual PLC program.
I've reconfigured the blocks twice with different GSDL files to no change in results. Any thoughts here would be appreciated.
Regards -
ABJECT
Facing a problem I've not seen before.
GE CPE100 unit, LAN2 set up as ProfiNet. Multiple Turck TBEN-L4-16DIP modules, and a Numatics Valve Stack. ProfiNET DCP tool shows all devices are communicating correctly, with no errors or diagnostic messages. Valves are all fully controlled via the PLC, with no issue. All inputs to the Turck blocks show change state on the block itself, as well as on the individual block's webpage when on the network; however, no state changes to any of the Inputs in the actual PLC program.
I've reconfigured the blocks twice with different GSDL files to no change in results. Any thoughts here would be appreciated.
Regards -
ABJECT