vel_sathish
Member
Hi all,
I have one digital panel meter (L&T make, Quasar Type) connected with PCthro kepserver interface. The datas recd from the meter is having 10 digits in kepserver. But in the meter it is showning some voltage valus like 85.5 or 90V like that. Can anybody help me to convert the 10 digit value to the above value in order to display the value in SCADA.
Note : In kepserver i have configured as Double Word & the protocol will be Modbus RTU.
Regrds,
sAtHiSh
I have one digital panel meter (L&T make, Quasar Type) connected with PCthro kepserver interface. The datas recd from the meter is having 10 digits in kepserver. But in the meter it is showning some voltage valus like 85.5 or 90V like that. Can anybody help me to convert the 10 digit value to the above value in order to display the value in SCADA.
Note : In kepserver i have configured as Double Word & the protocol will be Modbus RTU.
Regrds,
sAtHiSh