Kataeb
Member
After compiling a NetPro project, we got many errors as follows. What does this mean? What to do? Thank you
Error: The object has already been deleted.
Error: The object has already been deleted.
Siemens Netpro errors: the object has already been deleted
- Thread starter Kataeb
- Start date
JRW
Member
Can you do a save as reorg slow?
Then look at netpro
Then look at netpro
Last edited:
It works... Thank you
Remains some minor warnings.
Warning: The PROFIBUS addresses '14' and '15' of the active station (Master) in PROFIBUS subnet 'PROFIBUS Net 1' should not immediately follow each other.
Warning: On the PROFIBUS subnet 'PROFIBUS Net 1', there are additional active nodes in other stations that also have to be reloaded.
Similar Topics
Hi
Can anybody please explain how I can export the connections from Netpro and import to another project but I require only the connections...
For commuincation between Citect and Siemens through CP5611 and
MPI protocol I need to create a PCstation in NetPro and connect it
to my...
Hello,
I have an issue where I want to simulate an Siemens HMI panel, through NAT connection to a PLC. I have the possibility through extended...
Hi all!
Please inform me if i can make programing of the HMI SIEMENS IPC477D from TIA Portal software or not?
I do not have WINCC software but...
I have never had the pleasure of working with a "Thermistor" until now and have a question. The Thermistor is a 10KOhm 4-20mA 2-wire device and I...