BryanG
Member
You guys crack me up . Automatic restarting of a machine by just pressing the Emergency Stop Reset is of course not within the rules, but that isn't what I suggested. I said to split the safety in to two parts, one would be the Emergency Stop relay which would need a Reset and a Process Start. The second was the device that confirms the Safety Door is closed before the press can run. If you can tell me how having the operator perform two movements is safer than one, I shall be pleased to hear it.
I should state that I am not a Machine Press expert, but I watch "How It's Made", they close the gate, press one button, or press one foot pedal, or use two hands to operate a two hand system, and the press machine starts. They don't close the gate, press one button, then press another button, and then the machine starts.
I should state that I am not a Machine Press expert, but I watch "How It's Made", they close the gate, press one button, or press one foot pedal, or use two hands to operate a two hand system, and the press machine starts. They don't close the gate, press one button, then press another button, and then the machine starts.