I set the IP address of the powerflex 525 with imbedded ethernet port manual at the keypad. RSLINX does not recognize the drive. The drive lists on the name plate firmware 7.001. Yes I tried to flash it using control flash 15.07, but the flash says complete but still i can see the drive with yellow ?. Yes, i went to rockwell and downloaded the firmware ver 7.001 and 6.?? several times., the result the same. I read on this forum of somebody that had same problem and end up flashing firmware 6 and that solved his problem. Control flash does not see the firmware ver 6 but only sees ver 7.001. I tried to manually copy the eds files to the locations where control flash points to, but still only sees ver 7.001.how can I flash the drive with firmware ver. 6? to see if this works.
when i try to upload the eds file from the drive in rslinx, it shows complete but still has a yellow ?
when i try to upload the eds file from the drive in rslinx, it shows complete but still has a yellow ?