RMore
Member
I am a new user to Rockwell products. I am trying to connect a Panelview 300
Here's the specifics of the system.
Panel view 300 p/n 2711-K3A5L1 (RS232 version)
Firmware Version 4.48
Serial Cable 2711-NC13 (9 pin sub-d female both ends)
PanelBuilder32 Version 3.82.01
RSLinx version 2.57.00
The problem is I get no response from the HMI. I verified the serial port settings are correct and the port is working (connects to micrologix 1400 without a problem).
Any suggestions?
Here's the specifics of the system.
Panel view 300 p/n 2711-K3A5L1 (RS232 version)
Firmware Version 4.48
Serial Cable 2711-NC13 (9 pin sub-d female both ends)
PanelBuilder32 Version 3.82.01
RSLinx version 2.57.00
The problem is I get no response from the HMI. I verified the serial port settings are correct and the port is working (connects to micrologix 1400 without a problem).
Any suggestions?