osmanjdt Member O Join Date Jun 2016 Location johor Posts 108 Sep 20, 2016 #1 There have 2 different value in configuration output 2 on Omron CP1W-DA041 manual which one the correct? thanks for your time.
There have 2 different value in configuration output 2 on Omron CP1W-DA041 manual which one the correct? thanks for your time.
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Sep 20, 2016 #2 Most recent manual W462-E1-08 shows the same information as your OM1_DA041 screen shot. Hope this will help.
Most recent manual W462-E1-08 shows the same information as your OM1_DA041 screen shot. Hope this will help.
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Sep 21, 2016 #3 Your value of 'C' should be correct for 4-20mA range for the output. 1100 Binary = 'C' Hex. Regards,
osmanjdt Member OP O Join Date Jun 2016 Location johor Posts 108 Sep 21, 2016 #4 Thanks for your feedback, fully follow the instruction but still not working,still working on it. maybe missing something.
Thanks for your feedback, fully follow the instruction but still not working,still working on it. maybe missing something.
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Sep 21, 2016 #5 Are you using the First Cycle Flag A200.11 to initiate the MOV instruction? Is the Destination channel of the MOV instruction correct? Is the Source of the MOV instruction have a # prefix? Just a few of the things I have seen.
Are you using the First Cycle Flag A200.11 to initiate the MOV instruction? Is the Destination channel of the MOV instruction correct? Is the Source of the MOV instruction have a # prefix? Just a few of the things I have seen.