Dear friends,
I need help, please.
I use a PLC "micro850" which will read the data of an energy analyzer "Sentron PAC3200" via a Modbus TCP / IP protocol.
Then, this micro850 will connect via an Ethernet CIP network with a "Controllogix".
My problem was that the "PAC3200" gives a real Non swapped and I cannot recover the real real values.
In my program, I used the instructions "MSG_Modbus2" and "COP" to program the micro850 for reading the real value from the "pac3200"and "MSG" instruction to program the controllogix for reading the CIP value from Micro850.
thank you for your help.
I need help, please.
I use a PLC "micro850" which will read the data of an energy analyzer "Sentron PAC3200" via a Modbus TCP / IP protocol.
Then, this micro850 will connect via an Ethernet CIP network with a "Controllogix".
My problem was that the "PAC3200" gives a real Non swapped and I cannot recover the real real values.
In my program, I used the instructions "MSG_Modbus2" and "COP" to program the micro850 for reading the real value from the "pac3200"and "MSG" instruction to program the controllogix for reading the CIP value from Micro850.
thank you for your help.