Hi.
I have a question which am not able to solve.
There are 3 outputs (O1,O2,O3) and 2 inputs (I1, I2)
And we have to control these using the hold on switch/push switch.
If I1 pressed then O1 should work
If I2 Pressed then O2 should work and O1 should switch off.
If I1 pressed again then O1 and O3 should work and O2 needs to be off.
table -
I1 I2 O1 O2 O3
1 0 1 0 0
0 1 0 1 0
1 0 1 0 1
I have a question which am not able to solve.
There are 3 outputs (O1,O2,O3) and 2 inputs (I1, I2)
And we have to control these using the hold on switch/push switch.
If I1 pressed then O1 should work
If I2 Pressed then O2 should work and O1 should switch off.
If I1 pressed again then O1 and O3 should work and O2 needs to be off.
table -
I1 I2 O1 O2 O3
1 0 1 0 0
0 1 0 1 0
1 0 1 0 1