Hi,
I'm trying to setup a single pc solution to testing and devloping my PLC application. I have written an EthernetIP I/O simulator program that runs ~10 Eip Adapters running on my desktop. I want to be able to run rslogix, softlogix, rslinx (required for the first two), and my IO simulator.
The devices all establish class 1 IO connections to the PLC. And I have configured my pc network adapter's tcp-ip settings as follows (multiple IP address on a single network adapter):
192.168.1.10
192.168.1.11
192.168.1.12
192.168.1.13
192.168.1.14
192.168.1.15
...
The PLC is currently real hardware connected via a switch, but I intend to use softlogix in the future.
The problem with rslinx is that it seems to bind to several of the ip addresses randomly. Is there any way I can tell it to use only one IP address if the adapter as multiple addresses?
SW version is RSlinx classic 2.54.00.11 CPR 9 SR
I'm trying to setup a single pc solution to testing and devloping my PLC application. I have written an EthernetIP I/O simulator program that runs ~10 Eip Adapters running on my desktop. I want to be able to run rslogix, softlogix, rslinx (required for the first two), and my IO simulator.
The devices all establish class 1 IO connections to the PLC. And I have configured my pc network adapter's tcp-ip settings as follows (multiple IP address on a single network adapter):
192.168.1.10
192.168.1.11
192.168.1.12
192.168.1.13
192.168.1.14
192.168.1.15
...
The PLC is currently real hardware connected via a switch, but I intend to use softlogix in the future.
The problem with rslinx is that it seems to bind to several of the ip addresses randomly. Is there any way I can tell it to use only one IP address if the adapter as multiple addresses?
SW version is RSlinx classic 2.54.00.11 CPR 9 SR