Caleb_newprog
Member
Hey guys,
Currently struggling with a fault I get on a Lenze i510. Fault - F7180...
This happens when a piece of debris gets wedged in our track for this machine. Thus, having our maintenance wind the motor by hand just to get the carriage to move. I was finally able to see it today and I tried clearing the fault on the drive itself. I was actually able to clear it. One thing I did notice, was that when I did clear the fault, the drive then said KSTOP. Clearing the fault still did not let us move the carriage on the hmi. Need some help troubleshooting this, and yes I am working on getting something to get debris off the track. Going to be looking at the plc logic to see if there is anything I can change to make it work on that end. I am looking for some guidance and some knowledge from people that have been doing this longer than I have. (only been doing this for about a year)
I really appreciate you taking the time to read this and thank you!!!
Currently struggling with a fault I get on a Lenze i510. Fault - F7180...
This happens when a piece of debris gets wedged in our track for this machine. Thus, having our maintenance wind the motor by hand just to get the carriage to move. I was finally able to see it today and I tried clearing the fault on the drive itself. I was actually able to clear it. One thing I did notice, was that when I did clear the fault, the drive then said KSTOP. Clearing the fault still did not let us move the carriage on the hmi. Need some help troubleshooting this, and yes I am working on getting something to get debris off the track. Going to be looking at the plc logic to see if there is anything I can change to make it work on that end. I am looking for some guidance and some knowledge from people that have been doing this longer than I have. (only been doing this for about a year)
I really appreciate you taking the time to read this and thank you!!!