mrchris76
Lifetime Supporting Member
I started at a new company and I am moving from a place where we only used Wonderware to a place that has both Wonderware and Ignition. I am learning Ignition and its starting not to be so painful an experience. My problem is that from time to time the data in Ignition just drops out for 2 to 5 seconds (Boxes on HMI turn red and no data seems to be moving). It comes back online afterwards and works fine until the next time it happens. Right now it is only on a few applications and that data drop out is ok because we are mainly using it as a way to view data. Any controls are just sending commands to a drive ect and it is out of the picture until the programming in drive completes. Has anyone esle had this issue? If so how did you fix it?
I know there is a module that will keep the data flowing if main server goes down but is there another work around. I think it is probrably the network but I want to make sure I had asked the forum before I kicked in the IT departments door. I like what I am seeing from Ignition and I want to use it on all new installations but I am hesitant because of this data drop out.
Thanks,
Chris
I know there is a module that will keep the data flowing if main server goes down but is there another work around. I think it is probrably the network but I want to make sure I had asked the forum before I kicked in the IT departments door. I like what I am seeing from Ignition and I want to use it on all new installations but I am hesitant because of this data drop out.
Thanks,
Chris