setterwind
Member
Hello, I've been trying to learn this a while now and still have not found out how this works. I have an Omron CJ2M PLC and an ABB ACS 355 VFD with Fena-01 adapter. I know that this is trying to control the drive by external device over a communication network through a fieldbus adapter which is different than controlling the VFD through digital inputs (DI1-6) which I am more familiar with. But now I don't know which parameters of the VFD is mapped to which address of the PLC. For example, I want to able to set the motor frequency that I want to run at on the touchscreen rather than setting it directly on the VFD. What address do I use on the PLC to set the frequency? is it the D area, W area, etc..
Thanks,
Thanks,