cdwilliams496 Member C Join Date Apr 2018 Location Aiken, SC Posts 19 Mar 29, 2023 #1 I am trying to reduce the number of values behind the decimal point on the HMI. The values it is reading are "REAL" values from the PLC. I am using View Designer to program an AB 5510 HMI. Thanks, Davis
I am trying to reduce the number of values behind the decimal point on the HMI. The values it is reading are "REAL" values from the PLC. I am using View Designer to program an AB 5510 HMI. Thanks, Davis
KuulKuum Lifetime Supporting Member Join Date Jun 2006 Location Texas Posts 456 Mar 29, 2023 #2 I've never used View Designer but I would imagine that there is a numeric setting in the properties to set the digits before/after the decimal. Just reduce the amount should give you the results you want.
I've never used View Designer but I would imagine that there is a numeric setting in the properties to set the digits before/after the decimal. Just reduce the amount should give you the results you want.
pk_test Member P Join Date Mar 2023 Location Earth Posts 13 Mar 29, 2023 #3 Use a numeric display instead of text display
cdwilliams496 Member OP C Join Date Apr 2018 Location Aiken, SC Posts 19 Mar 31, 2023 #4 Thanks! I didn't notice they were using text displays instead of numeric displays. As always, Thanks for the help!
Thanks! I didn't notice they were using text displays instead of numeric displays. As always, Thanks for the help!