Hmi controling 24V input module

kennedy6277

Member
K
Join Date
Feb 2016
Location
Kitchener
Posts
11
Hey,
I am using a CompactLogix L32E, and trying to control my input module(1769-IQ16 (which is 24VDC sink/source)), using a Panel view 700 HMI. I have not tried connecting the HMI to the PLC yet. I am just wondering if this will be possible.
 
No, but the HMI can be made to write to the controller's tags (of any scope) over Ethernet/serial, which in turn are used in your logic.
 
Last edited:

Similar Topics

M
HMI Connection - {::[PLC1]Program:#1.#3.Abc.Efg} What is the #1.#3 ?
I'm having a hard time either remembering or figuring this out. I have a PLC program and the associated HMI program. I know what this means...
Replies
4
Views
92
plvlce
P
X
Detection of HMI Status in the PLC ?
Hello, I'm working with Studio 5000 and ME Station, and I'm trying to find a way to detect if the PC with the HMI is shut down or not. I've tried...
Replies
5
Views
116
Ken Roach
Ken Roach
N
RSLogix5000 --> C-More HMI; Array --> Text String
Hello everyone, Wondering if anybody can help me with this: I have a CompactLogix processor running a little robot cell. Every 200 cycles...
Replies
8
Views
122
nutcase511
N
B
Simulate Siemens HMI to PLC through NAT connection
Hello, I have an issue where I want to simulate an Siemens HMI panel, through NAT connection to a PLC. I have the possibility through extended...
Replies
4
Views
137
JesperMP
JesperMP
D
HMI connected but no changes
Hi there, I'm trying to learn about the siemens TIA HMI features and have been following tutorials on a simple start/stop button test, however I...
Replies
3
Views
101
JesperMP
JesperMP
Back
Top Bottom