Help to combine bet. LS plc "XGT" with schneider HMI & scada

samersamy

Member
S
Join Date
Nov 2014
Location
giza
Posts
2
Dear fellows,

I need to know what is the protocol which i can use in LS plc to make the schneider HMI and scada work with it .
I have alot of ethernet protocol types.
according to your answer I will buy the communication module.

2nd question:should I buy an LS ethernet switch or I can buy from schneider the switch
 

Similar Topics

C
Panelview Plus 7 Help
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Replies
3
Views
104
patrickmoneyy
P
P
Help w/ Proficy Machine Edition - GE Versamax Controller (Student License)
Hi Everyone, I own a GE Versamax controller that I purchased for a class at Long Beach City College a couple of years ago. I lost the use of my...
Replies
10
Views
152
P66Marc
P
A
need help
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...
Replies
2
Views
162
adam 1432
A
D
Cimplicity Workbench Help
Hello, I am working with cimplicity workbench, I have made changes to the current project from this machine I am using in the past. However when...
Replies
0
Views
51
Dylan Beg
D
S
Structured text beginner - help a brother out
Hello, doing switch from FBD to ST. First task is converting my old work. How do you sum variables? For example, Interlock1, interlocl2 and...
Replies
5
Views
193
drbitboy
drbitboy
Back
Top Bottom