Hello. I am attemping to convert the following flow/process diagram into a ladder diagram for use with a PLC. The entire process is fairly simple - only 9 distinct steps. I am also posting the process as an ordered list. Each step is accompanied by the associated physical device as well as an I/O designation (does the step involve input or output). While I can probably derive a crude ladder diagram, I would appreciate some help getting it up to industry standards in terms of safety and efficiency. Thanks in advance,
-Alex Bugrov
R.R. Lochhead Manufacturing
Flow Diagram:
Ordered List:
http://www.c-5.org/Temp/List 1.GIF
Device List:
PB1 = Push Button 1
V1 = valve 1
C1 = switch 1
V2 = valve 2
T1 = timer contact 1
T2 = timer contact 2
C2 = switch 2
-Alex Bugrov
R.R. Lochhead Manufacturing
Flow Diagram:
Ordered List:
http://www.c-5.org/Temp/List 1.GIF
Device List:
PB1 = Push Button 1
V1 = valve 1
C1 = switch 1
V2 = valve 2
T1 = timer contact 1
T2 = timer contact 2
C2 = switch 2