Flex I/O 5094 CJC

BAJ

Member
BAJ
Join Date
Jan 2006
Location
Maple Grove, MN
Posts
201
Has anyone used or have feedback on using the built-in thermistors for Cold-junction Compensation on the 5094-RTB3T* modules? We have a project with a lot of T/Cs and it would be nice to use all 8 inputs for process vs burning one input per module for CJC. The specs indicate the thermistors are accurate +/- 0.5 deg C, which should be close enough for what we are doing, but I'm curious if there are any other issues to be aware of with using the thermistors for CJC.

TIA,
-Brad
 

Similar Topics

O
Using 1756-EN2TR in Control Logix 5580 (L83e) to connect to FLEX-5000 (5094-AENTR)
Folks, Putting together a system utilizing a Control Logix Gen 8 (5580) PLC w/ the L83e CPU. I'll be connecting to 8 different FLEX-IO drops...
Replies
13
Views
4,108
odwyerpw
O
N
PowerFlex 252 - The Software Has Encountered An Unexpected Error
Hi, I'm currently having issued with a PowerFlex 252. It was working fine last week, and suddenly decided to stop working. When I go into...
Replies
1
Views
25
thinkpad
T
N
AB Powerflex 525 Date Type
Hello, I'm hoping someone can help me with understanding how to set/change these data types. We recently swapped from Invertek to AB drives...
Replies
1
Views
82
robertmee
R
dalporto
Rockwell IOFlex Analog Inputs status
Hi all. I have 1793-IE4 (4)analog inputs modules in a 1794-ADN IOFlex DeviceNet Rack. I cannot find if I can I have access to individual channel...
Replies
1
Views
33
dalporto
dalporto
P
PowerFlex 525 Fault Input Anomaly
All, I have a PowerFlex 525 driving an agitator motor. The goal is to have the agitator start automatically after a power loss or a comm loss. I...
Replies
2
Views
80
plcgrasshopper
P
Back
Top Bottom