Hi;
In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When the inverter is enabled, PLC communication creates problem. Kindly guide me on how to eliminate the issue.
The Ethernet cable is far from the inverter power and motor cables. When inverter is disabled, no problem with communication.
In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When the inverter is enabled, PLC communication creates problem. Kindly guide me on how to eliminate the issue.
The Ethernet cable is far from the inverter power and motor cables. When inverter is disabled, no problem with communication.