EDS File requirement for LUFP9 v3 (Devicenet to Modbus Gateway)

[neerajpuranik]

Dear Friends,
I am commissioning a plant having Rockwell Automation PLC communicating on Modbus with Schneider soft starter & Drives. For this we are using Devicenet to Modbus Gateway LUFP9 v3.
I am looking for Following EDS files:
lufp9_100.eds ( Major Revision no.2, Minor revision no.2)
atv71 devicenet v1 3
I googled these files but were not able to get them.
Kindly help
Regards,
Neeraj

 

[neerajpuranik]

Dear Friends,
I am commissioning a plant having Rockwell Automation PLC communicating on Modbus with Schneider soft starter & Drives. For this we are using Devicenet to Modbus Gateway LUFP9 v3.
I am looking for Following EDS files:
lufp9_100.eds ( Major Revision no.2, Minor revision no.2)
atv71 devicenet v1 3
I googled these files but were not able to get them.
Kindly help
Regards,
Neeraj

Can anyone from Schneider pl help....

 

[BobB]

I just had a look on the Schneider site and they do not list an EDS file for this device. You will have to ring their level 2 technical support I believe.

 

[neerajpuranik]

Dear Bob,
Thanks for the reply. I tried with Schneider Customer care also before posting message here but they seems unresponsive. My project is stuck just because of these EDS files as all the drives & soft starters are on communication & EDS files are not available anywhere.
Regards,
Neeraj

 

[yasirkhi]

Neeraj,

Here is what I got eds file for LUFP9.EDS. I have installed it in rsnetworx via eds wizard. I have not tried it yet. Let us know if it works. OK

 

[neerajpuranik]

Schneider ACB, Soft Starter & Drive on Device net

Neeraj,

Here is what I got eds file for LUFP9.EDS. I have installed it in rsnetworx via eds wizard. I have not tried it yet. Let us know if it works. OK

Thanks my friend, I will try this & will give you feed back....

One more question for everybody out there.....

Has anybody ever tried Schneider ACB's, Soft Starter (ATS48 with LUFP9) & Drives (ATV71) on communication with Rockwell PLC (Device Net). In my project not a single device is communicating over Device Net. The required EDS files are not available from Schneider. Really having bad time.....