Connecting Honeywell HC900 to Kepserverex

dearannie21

Member
D
Join Date
Aug 2017
Location
Illinois
Posts
6
Greetings!
I'm trying to connect HC900 to Kepserver in Plant via HC900 ethernet driver provided by Kepserver. I put the IP address and most of other settings are default. I'm having difficulties to get the connection and reading input values.
Does anyone have the experiences and know how to connect?

Thanks for reading
 

Similar Topics

T
Connecting thermocouple to Honeywell HC900
Greetings to all! As I am new to Honeywell's PLC usage, perhaps someone with more experience could help me. My assignement is to collect data...
Replies
2
Views
4,587
TheFog
T
T
Connecting a PLC5/40C to Honeywell Experion using 1785-ENET
As the title indicates I am trying to connect a PLC5/40C to Honeywell Experion R301 using 1785-ENET card. I am not really familiar with PLCs at...
Replies
2
Views
3,014
tck
T
H
RSLinx Bridge Configuration? Connecting through another PLC
I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
75
dmroeder
dmroeder
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
90
Tecnolaundry
T
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
143
jscampbell210
J
Back
Top Bottom