Automation_Novice
Member
Hi all, hope you are having a great day,
I am in need of your help to create a AOI or program that does this kind of job:
I have a IO Link Master with 4 ports. In one of these ports with be connected a IO Link device that will control 48 valves.
This device depending on what port is connected it will use word0, word 2 and word 4 of that specific port to open/close the valves bit by bit (48 in total).
What I need to do is to create a program that inside of it if i declare a specific port it will address the move/trigger command to only those bits of that port. Because maybe the other ports will be used by other devices. I tried to do it but when I do it with simple OTE and address bit by bit it will keep the unlatched the bits of other ports too even if i specify the port.
The image is a representation of the 3 words/integers of port no.1 and is the same for the other 3 ports.
Thanks to you all...
I am in need of your help to create a AOI or program that does this kind of job:
I have a IO Link Master with 4 ports. In one of these ports with be connected a IO Link device that will control 48 valves.
This device depending on what port is connected it will use word0, word 2 and word 4 of that specific port to open/close the valves bit by bit (48 in total).
What I need to do is to create a program that inside of it if i declare a specific port it will address the move/trigger command to only those bits of that port. Because maybe the other ports will be used by other devices. I tried to do it but when I do it with simple OTE and address bit by bit it will keep the unlatched the bits of other ports too even if i specify the port.
The image is a representation of the 3 words/integers of port no.1 and is the same for the other 3 ports.
Thanks to you all...