knucklebucket
Member
hope this isn't out of line, but only forum I belong to where I might get the answers I'm looking for. My company bought a pleater from a company and it turns out it is european. so had to also buy a 480vac/400vac transformer. I have it hooked up but with no success. factory installation on machine, I have 5 wires, 2 black,1 brown, white (neutral) and a ground. from the transformer I have 3 black and a ground. I have the 3 black tied to 2 black and brown and the ground is grounded. I do not have a white neutral on secondary side of transformer. I read voltages on two of the three phases, and zilch on the 3rd phase. Obviously I'm doing something wrong, but this totally something I'm not used to. anyone whom can chime in it would be greatly appreciated.