trueninjalo
Lifetime Supporting Member
Existing environment shown in attached photo (Existing.jpeg)
Proposed Environment shown in attached photo (New.jpeg)
I am migrating a PLC5 system to Studio 5k. There are two A4B racks (Rack00 and Rack01). Rack 00 has a 1785-ENET module, four 1771-IK encoder/counter modules, two 1771-IFE analog input modules and one 1771-OFE analog output modules. Rack 01 has all digital modules. The PLC5/60 is being replaced with a 1771-ASB module. A new ControlLogix 1756-A4 rack will hold a 1756-L81E, 1756-DHRIO and 1756-EN2TR. Rack 00 will now be a RIO rack.
The 1756-DHRIO is set up as shown in attached photo (DHRIO.jpeg) Both racks are configured as 1771-ASB full racks.
I have never setup an AOI but I was able to find some in similar existing programs. I was able to find AOIs for migrating all modules except the 1771-IKs. I am not entirely sure how the 1771-IKs work.
Before I dig in and try to invent the wheel, has anyone set these up in Studio5k yet? Any help on how to proceed would be gratefully accepted.
Proposed Environment shown in attached photo (New.jpeg)
I am migrating a PLC5 system to Studio 5k. There are two A4B racks (Rack00 and Rack01). Rack 00 has a 1785-ENET module, four 1771-IK encoder/counter modules, two 1771-IFE analog input modules and one 1771-OFE analog output modules. Rack 01 has all digital modules. The PLC5/60 is being replaced with a 1771-ASB module. A new ControlLogix 1756-A4 rack will hold a 1756-L81E, 1756-DHRIO and 1756-EN2TR. Rack 00 will now be a RIO rack.
The 1756-DHRIO is set up as shown in attached photo (DHRIO.jpeg) Both racks are configured as 1771-ASB full racks.
I have never setup an AOI but I was able to find some in similar existing programs. I was able to find AOIs for migrating all modules except the 1771-IKs. I am not entirely sure how the 1771-IKs work.
Before I dig in and try to invent the wheel, has anyone set these up in Studio5k yet? Any help on how to proceed would be gratefully accepted.