1756-EN3TR unknown in I/O configure on Rslogix 5000 v20

[suboliu]

Recently reinstall win7 32bit and reinstall Rslogix5000 v20 and open pre logix program, but its I/O configure display unknown 1756-EN3TR, I downloaded EDS files and 1756-EN3TR v5.08 from AB and reinstall them. when open program, it still displays unknown.
who know why and reasons.
any help is appreciate!

 

[nhatsen]

reinstall Rslogix5000 v20...

V20.01, 20.03, 20.04...?

I downloaded EDS files and 1756-EN3TR v5.08 from AB and reinstall them.

I'm looking at the RA site and there's an AOP for 1756-ENxTR version 10. Maybe you need to try that file.

 

[robertmee]

^....EDS files are for linx only. You need the AOP for RSLogix 5000 to recognize ENxT and TR modules.

 

[suboliu]

v20.01, 20.03, 20.04...?


I'm looking at the ra site and there's an aop for 1756-enxtr version 10. Maybe you need to try that file.

v20.01

 

[suboliu]

^....EDS files are for linx only. You need the AOP for RSLogix 5000 to recognize ENxT and TR modules.

I download AOP and installed, but still unknown

 

[robertmee]

I download AOP and installed, but still unknown

Evidently not the correct version

 

[suboliu]

Evidently not the correct version

Thanks a lot, I am download it again, and try again

 

[suboliu]

Evidently not the correct version

I download aop for 1756-enxtr version 10. and installed, still unknown. and another laptop can display that it is v10.01. but this laptop can't display

 

[suboliu]

V20.01, 20.03, 20.04...?


I'm looking at the RA site and there's an AOP for 1756-ENxTR version 10. Maybe you need to try that file.

see attach

 

[suboliu]

Evidently not the correct version

see attach

 

[robertmee]

Yes but does your ent3r have firmware 10 loaded in it or an earlier version? AOPs aren't accumulative...they don't have all the prior revisions...they are specific to the firmware revision in the module.

 

[nhatsen]

I download aop for 1756-enxtr version 10. and installed, still unknown. and another laptop can display that it is v10.01. but this laptop can't display

Did you try rebooting your laptop? Usually you don't need to do that, but you can try it.

If the difference is just the minor revision, you'd have to see the module on the I/O tree. Then you can select the compatibility mode in the module properties.



TN575816 Add-On profile (AOP) for 1756-EN2T series D, 1756-EN2TR series C, 1756-EN3TR series B (Access Level: Everyone)

 

[suboliu]

Did you try rebooting your laptop? Usually you don't need to do that, but you can try it.

If the difference is just the minor revision, you'd have to see the module on the I/O tree. Then you can select the compatibility mode in the module properties.



TN575816 Add-On profile (AOP) for 1756-EN2T series D, 1756-EN2TR series C, 1756-EN3TR series B (Access Level: Everyone)

Hello nhatsen,
Thank you very much!
from your this link, why I can only download AOP for 1756-ENxTR V10.00.00
and you show me that it is V10.001
see attach

 

[suboliu]

Yes but does your ent3r have firmware 10 loaded in it or an earlier version? AOPs aren't accumulative...they don't have all the prior revisions...they are specific to the firmware revision in the module.

I download v10.00, and installed, but still unknown. have any idea?

 

[suboliu]

Did you try rebooting your laptop? Usually you don't need to do that, but you can try it.

If the difference is just the minor revision, you'd have to see the module on the I/O tree. Then you can select the compatibility mode in the module properties.



TN575816 Add-On profile (AOP) for 1756-EN2T series D, 1756-EN2TR series C, 1756-EN3TR series B (Access Level: Everyone)

Hello nhatsen,
from this download link that you gave, I download it (v10.00.00 can't see v10.00.01) and downloaded it and installed it. the I/O tree still shows "Unknown"
any idea?