PanelView Mod. 2711P-RP Series

IamCool

Member
I
Join Date
Sep 2019
Location
NJ
Posts
8
I have a few 2711P-RP series Modules for the PanelView 1000. I purchased them because the price on the new TD series is criminal. The have no issues running the program but they don't always boot when power is turned on. If you turn of the power or pull the plug in the back and turn it back on or plugged it back in it will power back up.

Is this a known issue or is it just the 4 I have purchased?
;)
 

Similar Topics

S
Panelview Plus 7 Std Series D - Screen Navigation Issues
I'm at a loss here and hoping someone else has seen this: Background: We've got two identical machines on our floor (we'll call them machine A &...
Replies
0
Views
59
Super Steve
S
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
102
jscampbell210
J
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
79
celso3093
C
T
can i change panelview text using keypad?
Hey all, i have a panelview screen (image attached), with 4 items on it. Program 1, Program 2, ...3, ...4. The PLC i am using is a compactlogix...
Replies
7
Views
222
plvlce
P
F
PanelView Plus and .CRV Files
Hello All! Ok, we got a Work cell from a Integrator that is sending saved scanning data from the PLC to HMI (Panel View Plus) when I look at this...
Replies
3
Views
102
Foxtrot2050
F
Back
Top Bottom