Using keyboard as input during simulation mode

Ronja

Member
R
Join Date
Jan 2023
Location
Sweden
Posts
1
Hello.

Is there a way to bind keyboard keys on the computer running the simulation of the PLC so that you can emulate button press etc during simulation?

Example:

I want to be able to press the arrow keys to inc or dec a value during simulation. Or press a letter to emulate a start button.

I use GX Works2 and it is emulating Mitsubishi Q-series. QCPU type Q01, to be exact.

thanx
/Ronja
 
Last edited:

Similar Topics

A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
64
Alibaba07
A
T
Using Patch Panels in Control Panels
Adding ethernet equipment to an existing panel that has none. We have some solid ethernet cables coming from other remote cabinets that I plan to...
Replies
3
Views
124
nicherbert
N
K
RS485 Modbus RTU using PC com port in Twincat 3 issues
I'm trying to control a device via MODBUS RTU and the ModbusRtuMasterV2_PcCOM in Twincat 3. I've configured a device with the right com port and...
Replies
7
Views
222
Jkoso
J
L
Using RAs IO Device Library with 1576-ENBT
Hi, I'm trying to use the IO Device Library (Product Versions) which is configured to work with the 1756-EN4TR & 1756-EN2TR but my system uses...
Replies
0
Views
60
LabRat906
L
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
109
Para
P
Back
Top Bottom