sebastianp
Lifetime Supporting Member
Hi all.
I am wondering if anyone connected the FactoryTalk to collect data from a CNC, specifically FANUC.
I know my way around several SCADA and PLC platforms, new to CNC.
So far I noticed that KepServerEx includes a Focas1 driver, but on their site is shown a suite which support Focas1,Focas2, HSSB, PMC data, however for 1k more.
Also have found a CNC accelerator toolkit, explaining how to connect a CompactLogix/ControlLogix to a 35i Fanuc. From what I understand they are fitting the Ethernet port of CNC with Ethernet/IP driver.
We do not need to write data, only read system information. Therefore I am wondering if anyone used to collect data from Fanuc CNC using this way.
Thank you
sebastianp
I am wondering if anyone connected the FactoryTalk to collect data from a CNC, specifically FANUC.
I know my way around several SCADA and PLC platforms, new to CNC.
So far I noticed that KepServerEx includes a Focas1 driver, but on their site is shown a suite which support Focas1,Focas2, HSSB, PMC data, however for 1k more.
Also have found a CNC accelerator toolkit, explaining how to connect a CompactLogix/ControlLogix to a 35i Fanuc. From what I understand they are fitting the Ethernet port of CNC with Ethernet/IP driver.
We do not need to write data, only read system information. Therefore I am wondering if anyone used to collect data from Fanuc CNC using this way.
Thank you
sebastianp