ZestyMozzarella
Lifetime Supporting Member
Spoke to a few outlets including Emerson and some distributors. Apparently updating firmware on subsequent modules past the CPU still uses winloader which I have used before on older 90-30 models.
Trying to update firmware on a IC694APU300A and it doesn't seem to work.
IC694APU300A (updating it’s firmware w/ winloader)
It’s just the first one in line to have firmware updated. It’s on main rack slot 5. Here’s my USB port:
Here’s my serial tester saying it’s good in practice:
Here’s winloader loaded green and set up:
Even if the update baud is higher…it fails no matter what. Tried different baud rates downloading to CPU and setting port settings…nothing.
Just keeps trying and trying…nothing…a wall
I'm using the correct CBL316 cable attached to a MOXA USB adapter. Anyone have any idea what the malfunction may be besides the user! heh...
Trying to update firmware on a IC694APU300A and it doesn't seem to work.
IC694APU300A (updating it’s firmware w/ winloader)
It’s just the first one in line to have firmware updated. It’s on main rack slot 5. Here’s my USB port:
Here’s my serial tester saying it’s good in practice:
Here’s winloader loaded green and set up:
Even if the update baud is higher…it fails no matter what. Tried different baud rates downloading to CPU and setting port settings…nothing.
Just keeps trying and trying…nothing…a wall
I'm using the correct CBL316 cable attached to a MOXA USB adapter. Anyone have any idea what the malfunction may be besides the user! heh...