JRW
Member
I have a S7400 414-2 DP fw5.3 with a CP443 6GK443-1EX30 fw3.0 and FM350-2 on profinet
The interface module is a 6ES7153-4BA00 fw 4.0 (ET200M interface module)
All the I/O in the rack function (and drives on the network) fine but the FM counters will not count and I get a system fault regarding I/O access errors with the FM's
The problem is with the CP because I can move the same configuration to a CPU with a built in PN port and it works fine (I move this rack to the on board PN port with the cpu)
I am using the latest PN blocks v2.x (that I know of) for the FM350-2 on profinet
Can someone please verify if the FM350-2 works in a CP443 6GK443-1EX30 ?
Or ANY S7400 CP
I really just need a confirmation that this will work or not- or you have a similar S7400 system working
I know this doesnt work on an S7300 and a CP
THANKS!
The interface module is a 6ES7153-4BA00 fw 4.0 (ET200M interface module)
All the I/O in the rack function (and drives on the network) fine but the FM counters will not count and I get a system fault regarding I/O access errors with the FM's
The problem is with the CP because I can move the same configuration to a CPU with a built in PN port and it works fine (I move this rack to the on board PN port with the cpu)
I am using the latest PN blocks v2.x (that I know of) for the FM350-2 on profinet
Can someone please verify if the FM350-2 works in a CP443 6GK443-1EX30 ?
Or ANY S7400 CP
I really just need a confirmation that this will work or not- or you have a similar S7400 system working
I know this doesnt work on an S7300 and a CP
THANKS!
Last edited: