manual cx programer omron - PLCS.net

indra · December 16th, 2005, 11:20 PM

Does anyone knows, where I can download the user guide and programming manual of OMRON CX PROGRAMMER Ver 2.10 in English version ?

I also want to change the old CPU C200H to C200HS, please help me to get the procedure of replacement this CPU ? Is it only take out the old and change the new one then download the program ?

Regards,

INDRA

bluebyu · December 17th, 2005, 04:49 AM

Try MRPLC.com for this down load:

http://forum.mrplc.com/index.php?act...CODE=02&id=461

Or, try Omron's web site:

http://oeiwcsnts1.omron.com/pdfcatal...df?OpenElement

In your project workspace, double click on the PLC, use the pop up drop down to select the new PLC. CX Programmer than changes your program to suit the new PLC. Power the C200H down, remove the CPU, install the c200HS. Down load program. Make sure to save the DM area fron the c200h first, and than down load it also.

BobB · December 17th, 2005, 04:54 AM

That is an VERY OLD version of CX-P. You are lucky - here is a link

http://forum.mrplc.com/index.php?act...CODE=02&id=461

I would not change to the C200HS - it is very old and the power supplies are virtually unrepairable these days. Would change the rack, power supply and processor to the CS1 and upgrade CX-P to CX-One.

indra · December 19th, 2005, 03:44 AM

Hi, my friends,

Thank you very much for your info of manual instruction CX programmer. It is very helpful.

Regards,

INDRA

December 16th, 2005, 11:20 PM	#1
indra Member Join Date: Apr 2005 Location: indonesia Posts: 161	manual cx programer omron Does anyone knows, where I can download the user guide and programming manual of OMRON CX PROGRAMMER Ver 2.10 in English version ? I also want to change the old CPU C200H to C200HS, please help me to get the procedure of replacement this CPU ? Is it only take out the old and change the new one then download the program ? Regards, INDRA

December 17th, 2005, 04:54 AM	#3
BobB Lifetime Supporting Member Join Date: Jun 2002 Location: Sydney Posts: 4,517	That is an VERY OLD version of CX-P. You are lucky - here is a link http://forum.mrplc.com/index.php?act...CODE=02&id=461 I would not change to the C200HS - it is very old and the power supplies are virtually unrepairable these days. Would change the rack, power supply and processor to the CS1 and upgrade CX-P to CX-One. __________________ The Old Pfhaart

December 19th, 2005, 03:44 AM	#4
indra Member Join Date: Apr 2005 Location: indonesia Posts: 161	manual omron Hi, my friends, Thank you very much for your info of manual instruction CX programmer. It is very helpful. Regards, INDRA

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Omron CS1W-DRM21 Manual	Steve Crotty	LIVE PLC Questions And Answers	3	November 26th, 2005 06:31 PM
Omron Cx Programer V5	Will maintenance	LIVE PLC Questions And Answers	12	June 30th, 2005 03:02 PM
omron cx software required with program examples	greybigden	LIVE PLC Questions And Answers	1	March 5th, 2005 06:12 PM
How to use FIFO function using OMRON CX?	sutton	LIVE PLC Questions And Answers	7	July 12th, 2004 10:02 AM
advantech with Twincat over Parker with Omron CX Supervisor	rock	LIVE PLC Questions And Answers	3	March 7th, 2004 07:54 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

December 17th, 2005, 04:49 AM	#2
bluebyu Member Join Date: Aug 2005 Location: Pa Posts: 263	Try MRPLC.com for this down load: http://forum.mrplc.com/index.php?act...CODE=02&id=461 Or, try Omron's web site: http://oeiwcsnts1.omron.com/pdfcatal...df?OpenElement In your project workspace, double click on the PLC, use the pop up drop down to select the new PLC. CX Programmer than changes your program to suit the new PLC. Power the C200H down, remove the CPU, install the c200HS. Down load program. Make sure to save the DM area fron the c200h first, and than down load it also.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)