Omron Cx Programmer question - PLCS.net

tadams73 · August 26th, 2009, 03:18 AM

When I pull up some of by backup files using Cx Programmer 6.1 and try to go online I get a pop up saying "Modem Port Has Been Selected.Do You Wish To Continue".I can go to some previous backups and it works fine.Its been doing this more here lately.These backup are from as far back as 2005 and as new as last week.Im stumped.Thanks.

chavak · August 26th, 2009, 05:49 AM

You didn't mentioned how are you connecting, anyway

In Offline mode -> PLC Properties -> Network Type -> Settings - under the modem tab select none [just a guess only, explore on this]

mordred · August 26th, 2009, 08:01 AM

Its using a comm port assigned to the modem this is normal problem in that when the software gets written the first time it will set the port to whichever was used to transfer the program to the PLC originally. if you go to the project tree on the left. right click the processor symbol you should see change as an option. change your comm port assignment. Doube check which port your USB is currently using if your using a USB converter

August 26th, 2009, 03:18 AM	#1
tadams73 Member Join Date: Nov 2008 Location: Tennessee Posts: 25	Omron Cx Programmer question When I pull up some of by backup files using Cx Programmer 6.1 and try to go online I get a pop up saying "Modem Port Has Been Selected.Do You Wish To Continue".I can go to some previous backups and it works fine.Its been doing this more here lately.These backup are from as far back as 2005 and as new as last week.Im stumped.Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
coil on cx programmer	fons04	LIVE PLC Questions And Answers	12	October 23rd, 2018 10:54 PM
OMRON question	Lynn_2009	LIVE PLC Questions And Answers	2	August 11th, 2009 05:35 AM
manual cx programer omron	indra	LIVE PLC Questions And Answers	3	December 19th, 2005 03:44 AM
omron cx software required with program examples	greybigden	LIVE PLC Questions And Answers	1	March 5th, 2005 06:12 PM
How to use FIFO function using OMRON CX?	sutton	LIVE PLC Questions And Answers	7	July 12th, 2004 10:02 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

August 26th, 2009, 05:49 AM	#2
chavak Member Join Date: Jul 2002 Posts: 727	You didn't mentioned how are you connecting, anyway In Offline mode -> PLC Properties -> Network Type -> Settings - under the modem tab select none [just a guess only, explore on this]

August 26th, 2009, 08:01 AM	#3
mordred Member Join Date: Mar 2004 Location: Red Deer Posts: 1,892	Its using a comm port assigned to the modem this is normal problem in that when the software gets written the first time it will set the port to whichever was used to transfer the program to the PLC originally. if you go to the project tree on the left. right click the processor symbol you should see change as an option. change your comm port assignment. Doube check which port your USB is currently using if your using a USB converter

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)