FLip104618
Member
Hello, first time posting. I am currently working with a Cognex ISD900 camera. On this camera I have more than one job. This camera was recently upgraded from an IS7208 to its current model. With the 7208 I was able to create working logic with Studio 5000 V32. However the ISD900 is a different type of camera and the I/O mapping is not the same. I have tried to follow the instructions provided by Cognex but can't seem to get it to work. The following link is the instructions that were provided. I am fairly new to controls so any and all help is greatly appreciated. Here is a screenshot of what I have based on what I have read. Thanks for your efforts.
https://support.cognex.com/docs/isv...ialCommunications/comms-eip-loadjobrecipe.htm
http://www.plctalk.net/qanda/attachment.php?attachmentid=60664&stc=1&d=1642265383
https://support.cognex.com/docs/isv...ialCommunications/comms-eip-loadjobrecipe.htm
http://www.plctalk.net/qanda/attachment.php?attachmentid=60664&stc=1&d=1642265383