24fretslater
Member
Hey all! I'm up late in a hotel room working with my brother on a really cool Biogas system that we have been starting up all week. We are trying to read an array in the L32E with a MSG instruction in a SLC 5/05 and are getting the error code "Connection was broken Error Code(hex):d8
In the L32E the integer array tag is mapped to a SLC file number that is equal to the SLC 5/05 READ MSG instruction target address. (RSLOGIX5000>Logic>Map PLC/SLC Messages)
The SLC 5/05 READ MSG instruction:
Target Device= 500CPU, Local, NO MultiHop
Ethernet Network consists of:
2 SCADA PC's
1 Compactlogix L32E
5 SLC 5/05
3 ML 1400
1 ML 1100
3 AB PV+ (HMI)
10 VFDs (5 powerflex, 5 KTurbo with communication converter modules)
Everything is the bee's knees except trying to read "N104:1" (Virtual data file map) in the compactlogix.
Any reply would be greatly appreciated, thanks!!!
In the L32E the integer array tag is mapped to a SLC file number that is equal to the SLC 5/05 READ MSG instruction target address. (RSLOGIX5000>Logic>Map PLC/SLC Messages)
The SLC 5/05 READ MSG instruction:
Target Device= 500CPU, Local, NO MultiHop
Ethernet Network consists of:
2 SCADA PC's
1 Compactlogix L32E
5 SLC 5/05
3 ML 1400
1 ML 1100
3 AB PV+ (HMI)
10 VFDs (5 powerflex, 5 KTurbo with communication converter modules)
Everything is the bee's knees except trying to read "N104:1" (Virtual data file map) in the compactlogix.
Any reply would be greatly appreciated, thanks!!!