Siemens S7 1200 driver specific addressing

Join Date
Nov 2011
Location
Ireland
Posts
182
Hello,

I have an S7-1200 PLC. I have a HSC on it that is on "ID1000". i am trying to read this value on a SCADA system. I need to know the driver specific address so that i can find the High Speed Counter value on the PLC form the SCADA. I am using IGSS SCADA system

regards
 

Similar Topics

Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company...
Replies
1
Views
95
Hi Experts, I would like to make firmware upgrade from v3.0 to v4.5 (S7-1200 CPU 1215C). Can I do it from v3.0 to v4.5? Do I need to take some...
Replies
6
Views
179
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
Replies
39
Views
2,062
Which signals do I have to use to get data from camera. For example camera detects a defect and sends signal to controller. Power cable: CCB-PWRIO-05
Replies
1
Views
161
Hi First post here! I admit I am not too used to handle interrupt OBs in Siemens. I have a customer who has been buying a standardized solution...
Replies
4
Views
215
Back
Top Bottom