Pinout for PanelView 1000 plus power supply

Shambo

Member
S
Join Date
Dec 2022
Location
Illinois
Posts
1
im tring to find out if i have a bad power supply for my panelview 1000 plus. does anyone have the pinout for the 10 pin connector on the powersuply? included a pice of the power suply and back of the housing for part number referance.

Panelview 1000 plus.jpg Power supply.jpg
 
I fired up a 2711-RP2 power supply with the processor board unplugged. Voltages I see:

Clip side: red +5V, red 0V, black 0V, orange 0V, yellow 0V.
Non clip side: red +5V, black +5V, black 0V, black +24V, brown +1.4V.
 

Similar Topics

L
panelview 1200 RS232 cable pinout
Does anyone have the pinout for the RS232 cable used on AB panelview 1200's?
Replies
4
Views
6,909
Pierre
Pierre
P
Schnider Altivar RS485 Rj45 to DB9 pinout
Hello guys, I am trying to control a ATV12 via Modbus Poll software. I need the connection diagram for Altivar Modbus RJ45 port to DB9 port. Thank you
Replies
1
Views
569
Saffa
S
B
Pinout Modbus TCP onto S7-1200 through profinet port
Hello All I have a modbus tcp device(Julabo magio) with an DB9 pin assignment. Pin3=B and Pin8=A. I would like to connect it on the secondary...
Replies
4
Views
1,608
the_msp
the_msp
T
GE HHM cable pinout?
Anyone happen to know the pinout on the RJ12 side of a GE HHM cable? It's just a serial 3-wire and I know the DB-9 side. Thanks.
Replies
2
Views
1,070
timothy585
T
S
pinout for Parker 690+ programming cable?
I need to emergency fabricate a cable to program a Parker 690+ VFD. Part # CM351909 I believe. RJ6 on one end, DB9 on the other. I cannot find the...
Replies
1
Views
2,291
strantor
S
Back
Top Bottom