You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

Reply
 
Thread Tools Display Modes
Old September 7th, 2012, 02:55 PM   #1
Justshoot
Member
United States

Justshoot is offline
 
Join Date: May 2009
Location: south beloit
Posts: 14
SE, parameter files and addressing.

First software is Factory talk SE, plc is controllogix.
The first program old, if you go to the Hotbus_Mapping, rung 0. You can see that once we get on the job we program in the addresses for the AOI (F5008B-8T). for instance the LEG_1_HB has addresses 61, 60, 32, and 33. The parameter file starting with number #28 is the temp_set_abv were we program the same information into those addresses #28, #29, #30, #32 as the AOI. The pic (leg_1 pic ) the highlighted box is how its displayed and entered in and is a numeric input, the value entered here is stored in #28, which is invisible based on user logged in.

Now our customer wants more information but with warning set points so on and so forth. So to try and stream line this process for each piece of equipment. Instead of 4 or 6 parameters we would have 16 or 24. Which is just a pain when there maybe 60 pieces of equipment. So I modified one of the AOI’s which is the new program.
Look in the HOTBUS_MAPPING same as the first program AOI is just called different.

Thinking I could reference the addresses through the parameter file so that it looks at the AOI programmed address but writes the information entered into the various arrays. I.E. TEMP_SET_ABV, TEMP_SET_WABV,TEMP_SET_ABS, AND TEMP_SET_WABS.
So this in the parameter file above “#28={[HAZ_MON]TEMP_SET_ABV[60]} “ I thought I could do this "#28={[HAZ_MON]TEMP_SET_ABV[{[HAZ_MON]LEG_1_HB.BS1_Address]}" but tells me the tag doesn’t exist. So I figured syntax, but after changing it around it still didn't work. Wondering now if Factory Talk SE even capable of this.

Hope that makes sense.

http://uploadingit.com/file/vryariqdouwzo3fn/files.rar
http://uploadingit.com/file/wmps6y6z091xnalv/files.zip

Last edited by Justshoot; September 7th, 2012 at 02:57 PM.
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
I/O card addressing and configuration russrmartin LIVE PLC Questions And Answers 4 January 15th, 2013 02:04 AM
RS View Indirect Addressing TrillBill LIVE PLC Questions And Answers 1 February 27th, 2012 12:57 PM
S7 - using Arrays with Multiplex Addressing in ProTool RMA LIVE PLC Questions And Answers 4 August 12th, 2005 08:39 AM
I/O Indirect Addressing - PLC 5/80E relms LIVE PLC Questions And Answers 8 February 23rd, 2005 05:10 PM
RIO Addressing rob allan LIVE PLC Questions And Answers 5 August 20th, 2004 02:48 AM


All times are GMT -4. The time now is 04:08 PM.


.