You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

Reply
 
Thread Tools Display Modes
Old December 2nd, 2021, 08:25 AM   #1
hardaysknight
Lifetime Supporting Member
United States

hardaysknight is offline
 
Join Date: Dec 2015
Location: Southeast USA
Posts: 50
What's your favorite obscure tools you have? (Software or Hardware)

What do you guys have in your bag of tricks?

For software, my favorite is definitely PDF-XChange editor. There's a free version which has by far the best PDF editor that I've ever used (and I have a full license for Adobe). I use to to basically color on Hydraulic drawings so it's easier to show which hydraulic line is pressure or tank. Makes it easier for our maintenance guys to read. (https://www.tracker-software.com/pro...xchange-editor)

Greenshot is what I use for basic screenshots. You can set it to the PRTSCRN key so it's used like the basic snipping tool on windows, but with way more features. (https://getgreenshot.org/)

Notepad++ for ABB rapid programming or any other coding. (Also the compare plugin is a MUST)
(https://notepad-plus-plus.org/downloads/)

Hardware wise, I have a set of WERA insulated screwdrivers that I keep on my belt (https://www.amazon.com/Wera-Insulate...%2C206&sr=8-11). I don't work on anything without it.


I also have a Logitech MX Master 3 mouse. It's the best mouse I've ever used. (Horizontal scrolling ftw)

(https://www.amazon.com/Logitech-Mast...07S395RWD?th=1)

Last edited by hardaysknight; December 2nd, 2021 at 08:28 AM.
  Reply With Quote
Old December 2nd, 2021, 09:02 AM   #2
IanM8040
Member
United States

IanM8040 is offline
 
Join Date: Sep 2021
Location: omaha
Posts: 250
Theres a lot of cool little tools that you wouldn't think you'd need, but come in handy where you normally would have a headache.

Turck sensor tester, can output 20vdc for any kind of testing needed, will show pnp or npn (not that you couldn't test with a meter, but if you need to flag a sensor and watch from a distance, you can easily see the lights activating). Also good for bench testing/programming sensors as well

https://www.alliedelec.com/product/t...cp80/70035749/

NWS right Angle needle nose, best needle nose i've ever used in a cabinet for grabbing and landing wires, surprisingly comfortable and they keep your plier hand out of the way

https://www.amazon.com/dp/B07PY77D6K...0Y80ZZYBSPJGBH



PLC tools SIM IPE, portable bootp/dhcp server. It's super quick and simple to use, just recently set 40+ kinetix drives and other devices in multiple cabinets up, less than a minute setup on each to set the IP and change it to static without ever opening a laptop.


https://plctools.com/products/plc-to...d-bootp-server
  Reply With Quote
Old December 2nd, 2021, 09:20 AM   #3
hardaysknight
Lifetime Supporting Member
United States

hardaysknight is offline
 
Join Date: Dec 2015
Location: Southeast USA
Posts: 50
Oh yeah, I have all of those but the right angled pliers. Those look nice!
  Reply With Quote
Old December 2nd, 2021, 09:30 AM   #4
jstolaruk
Lifetime Supporting Member
United States

jstolaruk is offline
 
Join Date: Dec 2004
Location: Detroit, SE Michigan
Posts: 3,796
Quote:
Originally Posted by hardaysknight View Post
I also have a Logitech MX Master 3 mouse. It's the best mouse I've ever used. (Horizontal scrolling ftw)

(https://www.amazon.com/Logitech-Mast...07S395RWD?th=1)
That is some kind of mouse! Might need a week long training course on that one
__________________
I don't always test my code but when I do, I do it in production.
  Reply With Quote
Old December 2nd, 2021, 09:41 AM   #5
kolyur
Lifetime Supporting Member + Moderator
United States

kolyur is offline
 
kolyur's Avatar
 
Join Date: Oct 2004
Location: Wooster, Ohio
Posts: 1,568
Homemade version of sensor tester--very handy
Attached Images
File Type: jpg IMG_1757.jpg (125.2 KB, 629 views)
__________________
John
  Reply With Quote
Old December 2nd, 2021, 09:46 AM   #6
ndzied1
Lifetime Supporting Member
United States

ndzied1 is offline
 
ndzied1's Avatar
 
Join Date: Aug 2002
Location: Chicago, Illinois
Posts: 2,769
For making/modifying quick graphics for use on HMIs there are 2 programs I go to. Both freeware.

Paint.NET
Inkscape

If you download, do it right from the pages specific to the software. There are a lot of 3rd party download sites that host them but I think they download other stuff with them.
__________________
nOrM
======================
nOrM=Norman Dziedzic Jr.
I've never been to China but my phone has.
  Reply With Quote
Old December 2nd, 2021, 09:58 AM   #7
JesperMP
Lifetime Supporting Member + Moderator
Denmark

JesperMP is offline
 
JesperMP's Avatar
 
Join Date: Feb 2003
Location: ᚴᚬᛒᛅᚾᚼᚬᚠᚾ
Posts: 15,567
+1 for Inkscape.

Inno Setup - freeware (https://jrsoftware.org/isinfo.php). Use to create software installation package for software you make and distribute yourself.

WinDirStat - freeware (https://windirstat.net/). Use it to find out what is gobbling up the disk space on a computer.

Teamviewer - licensed (https://www.teamviewer.com/). For general remote support and also as a VPN Router when all else fails.
There are plenty alternatives, also less expensive and free, but TV is the best IMO.

hand tools:

Siemens 6GK1901-1GA00 Profinet cable stripping tool. Worth every Ýre.
__________________
Jesper
NOTICE:
JesperMP can be impolite, has passive-aggressive tendencies and may use sarcasm !
Also: ᛁᚠ ᚢᚬᚢ ᚴᚬᚾ ᚱᛅᚬᛏ ᚦᛁᛋ ᚦᛅᚾ ᚢᚬᚢ ᚼᚬᚠᛅ ᚴᚬᛁᚾᛅᛏ ᛘᚢ ᚱᛅᛋᛒᛅᚴᛏ

Last edited by JesperMP; December 2nd, 2021 at 10:02 AM.
  Reply With Quote
Old December 2nd, 2021, 10:02 AM   #8
hardaysknight
Lifetime Supporting Member
United States

hardaysknight is offline
 
Join Date: Dec 2015
Location: Southeast USA
Posts: 50
I also use Autohotkey and AutoIt to make scripts for our Windows based HMIs to open and close other software (e.g. Click a button on HMI that opens camera software, then overlays a button in the camera software to go back to the HMI. This is so that the operator has no access to Windows at all).
  Reply With Quote
Old December 2nd, 2021, 10:31 AM   #9
ndzied1
Lifetime Supporting Member
United States

ndzied1 is offline
 
ndzied1's Avatar
 
Join Date: Aug 2002
Location: Chicago, Illinois
Posts: 2,769
One more, and more obscure software I have started using is
ZoomIt

When giving a presentation it lets you zoom highlight and draw. It’s a bit quirky to learn but really useful doing internet presentation stuff.
__________________
nOrM
======================
nOrM=Norman Dziedzic Jr.
I've never been to China but my phone has.
  Reply With Quote
Old December 2nd, 2021, 10:49 AM   #10
alan_505
Lifetime Supporting Member
Australia

alan_505 is offline
 
Join Date: Feb 2007
Location: Melbourne,Victoria,Australia
Posts: 804
I like Faststone Screen capture it allows you to save screen capture to a word document for latter use, I found this really helpful when I had to do a lot of inductions in that I could create a word document with all the screenshots of the induction and refer back to that when doing the induction test.
  Reply With Quote
Old December 2nd, 2021, 10:53 AM   #11
jstolaruk
Lifetime Supporting Member
United States

jstolaruk is offline
 
Join Date: Dec 2004
Location: Detroit, SE Michigan
Posts: 3,796
This thread is a keeper.
__________________
I don't always test my code but when I do, I do it in production.
  Reply With Quote
Old December 2nd, 2021, 10:55 AM   #12
geniusintraining
Lifetime Supporting Member + Moderator
United States

geniusintraining is offline
 
geniusintraining's Avatar
 
Join Date: Jun 2005
Location: SC
Posts: 7,947
Quote:
Originally Posted by kolyur View Post
Homemade version of sensor tester--very handy
Very nice.... I think I will looking into making these, is that a M8 and M12 connection?

Not that I am trying to push my products but this is one I use a lot https://www.plccable.com/new-updated...-10vdc-0-22ma/ simple 0-10vdc and 4-20 signal generator
__________________
www.PLCCable.com PLC Communication Cables, PLC Trainers, MicroLogix, ControlLogix, Siemens, Allen Bradley and more...OEM and aftermarket supplies... Aftermarket 1784-U2DHP Allen Bradley USB to DH+, new USB to 485 modbus
  Reply With Quote
Old December 2nd, 2021, 10:57 AM   #13
hardaysknight
Lifetime Supporting Member
United States

hardaysknight is offline
 
Join Date: Dec 2015
Location: Southeast USA
Posts: 50
Quote:
Originally Posted by alan_505 View Post
I like Faststone Screen capture it allows you to save screen capture to a word document for latter use, I found this really helpful when I had to do a lot of inductions in that I could create a word document with all the screenshots of the induction and refer back to that when doing the induction test.



Wow. That's a cool one. If I'm understanding right, the software can recognize text and allow you to paste it into a word document to edit it as text? If so, that's amazing.
  Reply With Quote
Old December 2nd, 2021, 11:21 AM   #14
Peter Nachtwey
Member
United States

Peter Nachtwey is offline
 
Peter Nachtwey's Avatar
 
Join Date: Apr 2002
Location: The land of the woke and the home of the broke
Posts: 7,966
Mathcad! However, I wouldn't recommend it now.
There are many screen capture programs. The one I like for videos is OBS studio.
__________________
"Living is easy with eyes closed, misunderstanding all you see...." Strawberry Fields Forever, John Lennon
  Reply With Quote
Old December 2nd, 2021, 11:42 AM   #15
kolyur
Lifetime Supporting Member + Moderator
United States

kolyur is offline
 
kolyur's Avatar
 
Join Date: Oct 2004
Location: Wooster, Ohio
Posts: 1,568
Quote:
Originally Posted by geniusintraining View Post
Very nice.... I think I will looking into making these, is that a M8 and M12 connection?
Yes, M12 and 3-pin M8; we hardly use any 4-pin M8. The PCB just has one LED and a resistor so it only lights up with PNP sensors (99% of what we use). With a bicolor LED it could be made to work with both PNP and NPN (my next revision). My goal was to make it as compact as possible because most of the purchased ones I've seen are rather bulky. Our electricians all carry them in their toolboxes.
__________________
John
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
1734-IB8S EDS file jgebhardt LIVE PLC Questions And Answers 23 August 10th, 2017 11:30 AM
Learning PLC using software for simulation & emulation (Virtual environment) TheoPap LIVE PLC Questions And Answers 15 June 9th, 2016 04:03 PM
Learning PLCs: hardware vs. software background? Albert LaFrance LIVE PLC Questions And Answers 5 March 2nd, 2013 02:03 AM
I Need A Plc Hardware And Software banaran LIVE PLC Questions And Answers 7 December 27th, 2002 11:40 AM


All times are GMT -4. The time now is 06:24 AM.


.