s7-1200 Motion control

adam_lhadi

Member
Join Date
Feb 2022
Location
algeria
Posts
59
Hi everyone
i trying to learn s7-1200 motion control
can somebody give me some easy to understand and detailed sources
to learn the motion control


kind regards
 
Except pid, library blocks,
I’ve never seen them locked

Look at this link before passing judgment
 
Last edited:
I have to say I've found the Siemens help files universally terrible. Most of them require you to download a pre-made project that uses a locked FBD to solve the problem, rather than showing you how to actually do it.


The app examples often come with a pre-made project, yes, to show how it works. The help files almost never do.


They've been getting a lot better about not locking down library blocks. I suspect this is less for user convenience and more for developer convenience; my guess is that whomever makes libraries got sick of making small tweaks or updating, recompiling, and re-locking for every new Portal version....
 
I have to say I've found the Siemens help files universally terrible. Most of them require you to download a pre-made project that uses a locked FBD to solve the problem, rather than showing you how to actually do it.

yes bro the siemense manuals in this subject are so hard to understand
 

Similar Topics

when controlling a closed loop stepper motor with a PLC,the PLC doesn't know if the target position is reached or not unless the driver it selfe...
Replies
0
Views
982
Hi everyone i have a delta VFD ,it's control signal is from 0..10V or in Mamps (no -10..10v) my plc is 1251dc/dc/rly with analog output 0..20ma...
Replies
4
Views
2,135
Hello specialists! I am facing the problem with controlling the stepper motor. In this project I am using S7-1200 CPU 1214C DC/DC/DC (4 PTO...
Replies
8
Views
3,703
Hi, I have a 1214 on ip 192.168.0.100. This is connected to other modules through a switch on same network. I need to connect this to a company...
Replies
1
Views
95
Hi. I’m trying to upload program from existing PLC S7-1200. Create new project in TIA v15.1 then upload. After upload successfully, go online but...
Replies
5
Views
145
Back
Top Bottom