ASCII data sending issue via AWA or AWT at SLC5/05 CPU - PLCS.net

sinanmoral · November 26th, 2022, 02:17 PM

Hello,

Thanks in advance.

How can I send more than 82 characters using AWA or AWT?
to Zepra Printer via serial Rs232 communication?

Normally I can send the data up to 82 characters but I need to send more than 82 characters.

I designed barcode using Zebra programming language and there are more than 82 characters (Text file) that i need to send to Zebra printer to print.

By the way,My ascii knowledge is limited...

My Cpu is slc5/05 and using serial Port 0 on CPU...

Thanks.

drbitboy · November 26th, 2022, 05:32 PM

Can you break up the date into multiple strings, and then send the strings in sequence?

November 26th, 2022, 02:17 PM	#1
sinanmoral Member Join Date: Apr 2020 Location: Istanbul Posts: 46	ASCII data sending issue via AWA or AWT at SLC5/05 CPU Hello, Thanks in advance. How can I send more than 82 characters using AWA or AWT? to Zepra Printer via serial Rs232 communication? Normally I can send the data up to 82 characters but I need to send more than 82 characters. I designed barcode using Zebra programming language and there are more than 82 characters (Text file) that i need to send to Zebra printer to print. By the way,My ascii knowledge is limited... My Cpu is slc5/05 and using serial Port 0 on CPU... Thanks.

November 26th, 2022, 05:32 PM	#2
drbitboy Lifetime Supporting Member Join Date: Dec 2019 Location: Rochester, NY Posts: 6,146	Can you break up the date into multiple strings, and then send the strings in sequence? __________________ _ Brian T. Carcich i) Take care of the bits, and the bytes will take care of themselves. ii) There is no software problem that cannot be solved with another layer of indirection. iii) Measurement is hard. iv) I solemnly swear that I am up to no good v) I probably have the highest ratio of forum posts to actual applications in the field (∞). vi) Hakuna matata.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Micro800 ASCII ABL error id:7 issue	Aloescher	LIVE PLC Questions And Answers	4	August 16th, 2022 01:55 PM
writing ascii data to pc (hyperterminal)	bagged2drag	LIVE PLC Questions And Answers	7	August 28th, 2020 09:20 AM
MPI comunication	Manuel Raposo	LIVE PLC Questions And Answers	22	July 16th, 2007 08:24 AM
File Copying - File Size Issue SLC 5/04	soop7667	LIVE PLC Questions And Answers	11	December 1st, 2004 06:21 PM
ASCII input to PLC-5 - converting strings to numbers	Ron Beaufort	LIVE PLC Questions And Answers	3	April 10th, 2004 03:45 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)