How to connect a SLC5/03 to a PC via DH485 (RJ45)?

JesperMP said:
No....
Click to expand...

+1

shaydzmi said:
What prevents me from using the pins 1 & 2 ? Do they have 24V?
Click to expand...

Nothing but what are you going to use it with?, if I remember right its Pin 3 that has 24vdc

The UIC is a converter and converts DH485 to RS232 so your PC can understand it, your PC does not talk DH485
 

Similar Topics

B
Connect to SLC5/03 through attached Panelmate's #2 serial port?
Hello, I have one legacy system that I'm trying to troubleshoot - it's a SLC5/03 connected to an old Panelmate 1785. I can connect to the SLC...
Replies
6
Views
1,446
geniusintraining
geniusintraining
A
SLC5/03 connect to panelview 800
Hi there, I'm wanting to connect a panelview 800 to an SLC5/03 the SLC is connected to an 1747-AIC which is run to another 1747-AIC. I'm trying...
Replies
0
Views
1,556
abrown01
A
S
What is the cable pinout to connect a Magelis XBTGT HMI to SLC5/03 DF1
Tried a straight through 9-pin RS-232 and a null model cable. No luck so far.
Replies
0
Views
1,548
sanger
S
S
Numatics valve manifolds connect to slc5/05
Looking for some help to understand memory mapping for a slc5/05 utilizing a 1746-sn module to (2 manifolds) numatics 2.2 manifold coupled via...
Replies
0
Views
2,212
slimpickens51
S
E
can't connect to a slc5/04
Hello , im trying to connect to a slc 04 using the rs232 port but for some reason when i auto configure want let me , says check cable or switch...
2
Replies
17
Views
4,322
harshman
H
Back
Top Bottom