S7-300 Modules - Profinet

mad4x4

Member
Join Date
Mar 2009
Location
ST CYrus
Posts
352
Can these modules :

Code:
S7-300 SM321 16DI 120/230VAC	        Siemens	6ES7321-1FH00-0AA0
S7-300 SM331 8AI 16Bit	                Siemens	6ES7331-7NF10-0AB0
S7-300 SM332 8AO 12Bit	                Siemens	6ES7332-5HF00-0AB1
S7-300 SM322 16DO Relay	                Siemens	6ES7322-1HH01-0AA0

Be used with a ProfiNet Interface Card, If so which one?
 
These are all ET200M i/o

Looks to all work with this one

6ES7 153-4AA01-0XB0

Put this in your hardware config with Step7

The AO is a AB0 though

et200m.jpg
 
Last edited:
The part numbers ( 6ES7321-1FH00-0AA0) & ( 6ES7322-1HH01-0AA0) are actually correct as these are older revision cards that we have ( legacy stock) from a project that was new but mothballed before it was built. (Also have a load of spares).

Will the 0AA0 card work, even though they are the older revision?
 

Similar Topics

i m working on an old machine that has a layout of 1 cpu 6es7 315-6tg10-0ab0 (bus adresss 2) 1 et200s 6es7 151-1aa04-0abo (bus adress 4) 1 et200s...
Replies
7
Views
3,175
Hello my fellow plc masters. I have come to ask you again :D Lets start the story. A few days ago i've made a post here about a s7-300 plc and...
Replies
19
Views
4,545
Hello, We have a system integrator at a site that is reporting that the IO modules in a S7 expansion rack (using IM360/360 modules) are crossed...
Replies
2
Views
2,688
Hi all, When configuring S7300 analog module with 4-20 mA range, there is an option called Measuring Type, and I should choose 2DMU or 4DMU. I...
Replies
11
Views
4,312
Hello all, I am replacing some old Siemens S5 modules (6ES5 646-8MA21) with S7-300 that measure thermocouples. I have been looking at modules...
Replies
0
Views
1,317
Back
Top Bottom